Semi-Auto Tripod Turnstile Entrance Control (FJC-Z3318)

Semi-auto tripod turnstile entrance control(FJC-Z3318)
Technical Parameter
1 Channel width: 550~600mm
2 Working circumstance: Indoor, outdoor
3 Working environments: -30~+70
4 Relative humidity: ≤ 95% coagulation free
5 Voltage: AC 220V± 10% 50Hz
6 Input interface: 12V signal level or 12V pulsing signal with pulse width>100ms
7 Driving current: >200mA, support multiple signal input
8 Communication interface: RS485
9 Communication distance: 1200M
10 MCBF: 1 million times

Functions and characters
1 Can open the turnstile by two input signals (signals can be input by access controller, button or other equipments)
2 Direction guide function, when the turnstile is ready to read card, the yellow light in the middle will turn one; After reading card and ready for passing, the upper blue light will turn on; If try to push the railing without permission, the red light will turn on
3 Single direction or double direction optional
4 Railing will be off when power off
5 Counting function, if read the card for N times, N persons can pass before the railing close, N<=8(optional function)
6 Voice prompt and display screen available (optional)
7 External counter can be connected to count number of passed people (optional)
8 RS485communication, PC command through serial port is allowed (optional)
9 Alarming output for pushing the railing without permission(optional)

1 Factory entrance control
2 Seabeach entrance control
3 Shopping center entrance control
4 Museum center entrance control