Swing Barrier Entrance Control (FJC-Z2148)

1. Height Turnstile
Power consumption 100W
Housing Size 1400*280*950mm
Housing material 1.5--2mm, 304# stainless steel, corosion resistant
Drive motor DC brushless motor
Channel width 500--600mm
Pass speed 40 persons/min.
IP protection IP44
Input Signal optional DC12V/dry/contact/RS485/RS232/Remote)
Railing-off against power off Yes
Working enviroment temperature minors 30° C to 70 ° C
Working environments indoor, outdoor
Relative humidity ≤ 95% coagulation free
MCBF 2, 500, 000 cycle

2. Can be expanded to automatic identification system, realizing function of access control, pedestrian flow control, attendance check or fare collection.
3. Equipped with international standard electrical interface, can be easily integrated with other R/W device, also can be controlled and management through remote supervision computer
4. Equipped with a couple of infrared photocell, alarm at unauthorized entry or tailgating attempts, together with anti-strike function to protect pedestrian
5. LED gate direction indicator that displays the current operational state to pedestrian. Green arrow for entry free, Red cross for passage locked.
6. Can open the turnstile by two input signals (signals can be input by access controller, button or other equipments)
7. Provide audible sound prompt and information display function.
8. The flaps will open automatically during power interruption, and recover N/C mode after power on(optional)
9. Counting function. Flap closes after passing N pedestrians continuously by swiping card N times correspondingly (N<=16) (optional)
10. Reversed passing alarm function, barrier will alarm if pedestrian pass from opposite direction after reading the card. (optional)